• Senior Lecturer
• Assistant to the Deans of the School of Materials Science and Engineering
• Ph.D. (Materials Science and Engineering, Ulsan University, Korea, 2009)
• Master. (Materials Science and Engineering, Hanoi University of Science and Technology, Vietnam, 2002)
• Engineer (Metallurgy Hanoi University of Science and Technology, Vietnam, 2000)
• E-mail: nguyenhoang@hust.edu.vn

• Agglomerate technology of iron oxides
• Reduction kinetics indirect reduction and smelting reduction of iron ore
• Synthesis and application of Al-, Ti-, and Fe-based amorphous alloys and quasi-crystal alloys
• HEA (High-entropy alloy) preparation by mechanical alloying and consolidation processes
• Application of artificial intelligence (AI) in metallurgical industry

1. Direct reduction and smelting reduction of iron oxides
2. Sintering and pelletizing processes of iron ores
3. Materials characterization/Methods for materials research
4. Physical metallurgy
5. Amorphous materials.

1. University project in 2020: Effect of rare-earth on the amorphization of Al-Fe-Re alloys prepared by mechanical alloying.
2. MOET project in 2021-2022: Production of non-crystal Al-based alloys by mechanical alloying and spark plasma sintering.

1. Nguyen Hoang Viet, Pham Ngoc Dieu Quynh and Nguyen Thi Hoang Oanh: Reduction Kinetics of Mill Scale Briquettes by Using A3 Fine Coal as a Reductant; J. Nanosci. Nanotechnol (ISI), 21, pp. 2563-2567 (4/2021).
2. Nguyen Thi Hoang Oanh and Nguyen Hoang Viet: The Cu Matrix Strengthened by TiH2-C In-Situ Synthesized via Mechanical Milling and Spark Plasma Sintering; J. Nanosci. Nanotechnol (ISI), 21, 2687-2691 (4/2021).
3. Silva, M.-B.R.; Roche, V.; Blanco, T.M.; Viet, N.H.; Balancin, O.; Cabrera, J.-M.; Jorge, A.M., Jr.: Effect of Processing Conditions on the Microstructure, Mechanical Properties, and Corrosion Behavior of Two Austenitic Stainless Steels for Bioimplant Applications; Metals (ISI), 10 (10), 1311 (2020).
4. Nguyen Minh Thuyet, Nguyen Hoang Viet, Le Thai Hung, Dang Quoc Khanh, Jin-Chun Kim: Properties of the interface between the as-built Ti–6Al–4V sample and the Ti substrate in selective laser sintering; International Journal of Modern Physics B (ISI), Vol. 34, No. 22, pp. 2040137 (2020).
5. Nguyen Hoang Viet, Nguyen Thi Hoang Oanh: Microstructure and Electrical Property of Ex-Situ and In-Situ Copper Titanium Carbide Nanocomposites; Metals (ISI), 10 (6), 735 (2020);
6. Nguyễn Thị Hoàng Oanh; Nguyễn Hoàng Việt: Tổ chức tế vi và độ cứng của gang trắng crôm cao Fe-12,8Cr-3,2C sau nhiệt luyện; Tạp chí Khoa học – Công nghệ kim loại, số 89, trang 32-35 (2020).
7. Nguyen Thi Hoang Oanh, Nguyen Hoang Viet: Precipitation of M23C6 Secondary Carbide Particles in Fe-Cr-Mn-C Alloy during Heat Treatment Process; Metals (ISI), 10 (2), 157 (2020).
8. Nguyen Minh Thuyet, Viet Hoang Nguyen, Jin-Chun Kim: The Microstructural Revolution of Ti-6Al-4V Specimens Fabricated by Selective Laser Sintering of Pre-alloyed Powders”; VIETNAM JOURNAL OF SCIENCE AND TECHNOLOGY, Vol. 57, No. 3A, trang 103-111 (2019).
9. Nguyen Hoang Viet: High-strength Al-based bulk alloy produced by spark plasma sintering of gas atomized powders; Journal of Science and Technology, số 135, trang 38-42 (2019).
10. Nguyen Hoang Viet, Do Nam Binh, Pham Ngoc Dieu Quynh, Nguyen Thi Hoang Oanh: Crystallization of Al-Ni-La gas atomized powders; Tạp chí khoa học công nghệ kim loại, số 83, trang 43-46 (2019).
11. Nguyen Hoang Viet, Nguyen Thi Hoang Oanh, Ji-Soon Kim and Alberto Moreira Jorge, Jr: Crystallization kinetics and consolidation of Al82La10Fe4Ni4 glassy alloy powder by spark plasma sintering; Metals (ISI), 8 (10), pp. 812 (2018).
12. Nguyen Hoang Viet, Vu Nga Linh, Nguyen Thi Hoang: Microstructure investigation of spark plasma siniered nano-sized Cu powders; Tạp chí khoa học công nghệ kim loại, số 80, trang 35-43 (2018).
13. Phan Hoang Linh, Hoang Thi Phuong Loan1, Bui Thi Tu Anh, Phung Van Manh, Nguyen Huu Dong, Le Hong Thang, Nguyen Quang Tung, Nguyen Thi Hoang Oanh, Pham Ngoc Dieu Quynh, Nguyen Hoang Viet: Reduction and swelling of iron ore pellets by A3 coal, Hội nghị về Vật liệu và Công nghệ Nano Tiên tiến-WANN, trang 50-56 (2017).
14. Nguyen Thi Hoang Oanh, Nguyen Hoang Viet, Dina V. Dudina, Alberto Moreira Jorge Jr, Ji-Soon Kim: Structural characterization and magnetic properties of Al82Fe16TM2 (TM: Ti, Ni, Cu) alloys prepared by mechanical alloying; Journal of Non-Crystalline Solids (ISI), Vol. 468, pp. 67-73 (2017).
15. Oanh Nguyen Thi Hoang, Viet Nguyen Hoang, Ji-Soon Kim and Dina V. Dudina: Structural Investigations of TiC–Cu Nanocomposites Prepared by Ball Milling and Spark Plasma Sintering; Metals (ISI), 7 (4), pp. 123 (2017).
16. Nguyen Thi Hoang Oanh: Nguyen Hoang Viet, Ji-Soon Kim and Alberto Moreira Jorge Junior: Characterization of In-Situ Cu–TiH2–C and Cu–Ti–C Nanocomposites Produced by Mechanical Milling and Spark Plasma Sintering; Metals (ISI), 7 (4), pp. 117 (2017).
17. Viet H. Nguyen, Oanh T. H. Nguyen, Dina V. Dudina, Vinh V. Le and Ji-Soon Kim: Crystallization Kinetics of Al-Fe and Al-Fe-Y Amorphous Alloys Produced by Mechanical Milling; Journal of Nanomaterials (IS), Article ID 1909108 (2016).