pgs.ts phạm mai khánh

Phó Viện Trưởng

  • Tốt nghiệp ĐHBK Hà Nội, Việt Nam
  • Thạc sỹ tại ĐH Tổng hợp Ehime, Nhật Bản
  • Tiến sỹ tại ĐHBK Hà Nội, Việt Nam
  • E.mail: khanh.phammai@hust.edu.vn

Lĩnh vực nghiên cứu

  • Thép Mn cao
  • HAZ
  • Hợp kim tiên tiến (nhớ hình, y sinh…)
  • Phân tích cấu trúc bằng TEM

các môn học giảng dạy

  • Công nghệ vật liệu
  • Hợp kim và Công nghệ nấu luyện
  • Truyền nhiệt & chuyển khối
  • Lý thuyết hợp kim hóa và biến tính
  • Hiển vi điện tử và vi nhiễu xạ

Các công trình khoa học tiêu biểu

  1. Nguyen Duong Nam, Tran Phap Dong, Tran The Nam, Nguyen Hong Hai, and Pham Mai Khanh*: Influence of the Deformation on the Microstructure and Mechanical Properties of TBF Steel. Journal of the Korean Society for Precision Engineering, Vol. 37, 8-2020. ISSN: 1225-9071/2287-8769, doi: 10.7736/JKSPE.019.054
  2. Bui Thi Ngoc Mai, Nguyen Xuan Dong, Pham Mai Khanh*, Tran Duc Huy*: Influence of rare earth on the microstructure and mechanical properties of Al-Zn alloy. International Journal of Modern Physics B, Vol. 34, No. 22n24, 6-2020. ISSN: 0217-9792, doi: 10.1142/S0217979220401256
  3. Le Thi Nhung, Pham Mai Khanh*, Nguyen Duc Thang, Bui Sy Hoàng: Microstructures In HAZ After Heat Treatment Of Carbon Steel And Austenitic Stainless Steel Welds. Materials Science Forum, Vol. 985, pp. 137 – 146, 4-2020. ISSN: 0255-5476, org/10.4028/www.scientific.net/MSF.985.137
  4. Nguyen Q. Cao, Hai M. Le, Khanh M. Pham, Nam V. Nguyen, Sachiko Hiromoto and Equo Kobayashi: In Vitro Corrosion and Cell Response of
    Hydroxyapatite Coated Mg Matrix in Situ Composites for Biodegradable Material Applications. Materials, Vol. 12, Issue 21, 10-2019. ISSN: 1996-1944, doi: https://doi.org/10.3390/ma12213474
  5. Nguyen Duong Nam, Nguyen Duong Nguyen, Pham Mai Khanh*: Influence Of  Rare-Earth On The Microstructure And Mechanical Properties Of High Manganese Steel Under Impact Load. Acta Metallurgica Slovaca, Vol. 25, No. 3, 09-2019, p. 158-165. ISSN: 1335-1532, doi: http://dx.doi.org/10.12776/ams.v25i3.1309
  6. Khanh Mai Pham*, Thai Thi Le, Nhung Thi Le, Tuan Anh Vu, Quyen Viet Vu, Nam Duong Nguyen: Effect of Element Addition and Heat Treatment Process on the Properties of High Manganese Steel. International Journal on Advanced Science, Engineering and Information Technology (IJASEIT), Vol. 9, No. 4, 8-2019, p. 1289-1295. ISSN: 2088-5334, http://dx.doi.org/10.18517/ijaseit.9.4.8801
  7. Vu Anh Tuan, Nguyen Duong Nam, Pham Ngoc Vuong, Mai Van Thi, Pham Mai Khanh*: Influence Of  Nikel On The Microstructure And Mechanical Properties Of Aluminium Copper Alloy. Journal of Mechanical Engineering Research & Developments (JMERD), Vol. 42, No. 02, 4-2019, p. 84-86. ISSN: 1024-1752, doi: http://doi.org/10.26480/jmerd.02.2019.84.86
  8. Nguyen Duong Nam, Vu Anh Tuan, Nguyen Hai Yen, Dao Van Lap, and Pham Mai Khanh*: A Study Of Phase Transformation In Shape Memory Alloy CuAl9Fe4. Journal of Mechanical Engineering Research & Developments (JMERD), Vol. 41, No. 02, 4-2019, p. 72-75. ISSN: 1024-1752, doi: http://doi.org/10.26480/jmerd.02.2019.72.75
  9. Nhung Le, M.Khanh Pham, A.Tuan Hoang, D.Nam Nguyen: Microstructures And Elements Distribution In The Transition Zone Of Carbon Steel And Stainless Steel Welds. Journal of Mechanical Engineering Research & Developments (JMERD), Vol. 41, No. 03, 9-2018, p. 27-31. ISSN: 1024-1752, doi: http://doi.org/10.26480/jmerd.03.2018.27.31
  10. Thi Nhung Le, Mai Khanh Pham, Anh Tuan Hoang, Thi Ngoc Mai Bui, Duong Nam Nguyen: Microstructure Change For Multi-pass Welding Between Austenitic Stainless Steel And Carbon Steel. Journal of Mechanical Engineering Research & Developments (JMERD), Vol. 41, No. 02, 7-2018, p. 97-102. ISSN: 1024-1752, doi: http://doi.org/10.26480/jmerd.02.2018.97.102
  11. Mai Khanh Pham*, Duong Nam Nguyen, Anh Tuan Hoang: Influence of Vanadium Content on the Microstructure and Mechanical Properties of High-Manganese Steel. International Journal of Mechanical & Mechatronics Engineering (IJMME-IJENS), Vol. 18, No. 02, 4-2018, p. 141-147. ISSN: 2227-2771, http://ijens.org/IJMME%20Vol%2018%20Issue%2002.html
  12. Le Thi Nhung, Pham Mai Khanh*, Le Minh Hai, Nguyen Duong Nam: The relationship between continuous cooling rate and microstructure in the heat affected zone (HAZ) of the dissimilar weld between carbon steel and austenitic stainless steel. Acta Metallurgica Slovaca, Vol. 23, No. 4, 12-2017, p. 363-370. ISSN: 1335-1532, doi: 10.12776/ams.v23i4.1002
  13. Nguyen Duong Nam, Le Thi Chieu, Pham Mai Khanh*: Studies on the Mechanism of Work Hardening of Austenitic High Manganese Steel Alloyed with Chromium and Vanadium. Key Engineering Materials (KEM), Vol. 737, 6-2017, p. 32-37. ISSN: 1662-9795, doi: 10.4028/www.scientific.net/KEM.737.32
  14. Pham Mai Khanh*, Nguyen Hong Hai, Dang Quoc Khanh, Dao Hong Bach: Investigation of solidification process of as-cast ADC12 in sand molds with different pouring conditions by temperature field. Key Engineering Materials (KEM), Vol. 682, February 2016, pp. 212 – 219. ISSN: 1662-9795, doi: 10.4028/www.scientific.net/KEM.682.212
  15. Le Thi Chieu*, Sai Manh Thang, Nguyen Duong Nam, Pham Mai Khanh: The Effect of Deformation on Microstructure of Cu-Ni-Sn Aging Alloys. Key Engineering Materials (KEM), Vol. 682, February 2016, pp. 113 – 118. ISSN: 1662-9795, doi: 10.4028/www.scientific.net/KEM.682.113
  16. Pham Mai Khanh*, Nguyen Duong Nam, Le Thi Chieu, Hoang Thi Ngoc Quyen: Effects of Chromium content and impact load on microstructure and properties of High Manganese Steel. Materials Science Forum, Vol. 804, pp. 297 – 300, 2015. ISSN: 0255-5476

sách đã xuất bản

  1. Phạm Mai Khánh, Lê Thị ChiềuThép Austenit Mangan cao, Nhà xuất bản Bách khoa Hà Nội 2016.

CÁC ĐỀ TÀI/DỰ ÁN ĐANG THỰC HIỆN

  1. Nghiên cứu quá trình chuyển pha hợp kim CuAl9Fe4Ni2 dưới tác dụng của biến dạng và xử lý nhiệt, Đề tài Quản lý tập trung, Mã số T2020-TĐ-002
SInh viên Học bổng Biểu mẫu
Student Scholarship Form