Home » Officers » Assoc.Prof. Le Thai Hung

Assoc.Prof Le Thai Hung

  • Vice Dean of School of Materials Science and Engineering
  • Head of Mechanics of Materials and Metal Forming Department
  • Senior Lecturer
  • Graduated from Hanoi University of Science and Technology
  • PhD at Joseph Fourier University, Grenoble, France

E-mail: hung.lethai@hust.edu.vn

RESEARCH INTEREST

  • Modeling and numerical simulation of materials
  • Composite Material Behavior Research
  • Advanced forming methods
  • Materials and 3D Printing Technology

TEACHING COURSES

  1. Thermo-mechanical behavior of materials
  2. Materials forming technology
  3. Composite Materials
  4. Advanced forming technology
  5. Automation of the production process
  6. Materials and 3D Printing Technology
  7. Nanomaterials Technology

SELECTED PUBLICATIONS

  1. Nguyen Minh Thuyet, Le Thai Hung, Dang Quoc Khanh, Facile Decoration of Silver Nanowires Microstructure with Carbon Nitride Nanoparticles as a Membrane for Water Treatment, Acta Metallurgica Slovaca, p-ISSN 1335-1532, e-ISSN 1338-1156, vol.26, pp.100-103, 2020
  2. Do Quang Long, Dinh Van Hai, Le Thai Hung, Effect of temperature and sleeve thickness on cross fitting lateral process for bimetal material by numerical simulation, Vietnam Journal of Mechanics, ISBN 0866-7056, Vol.4, pp. 38-44, 2020
  3. Le Thai Hung, Le Van Son, Nguyen Tuan Huy, Hoang Nguyen Ky, Le Manh Cuong, Nguyen Van Dat, Nguyen Minh Thuyet, Microstructure and tensile strength evaluation of polypropylene matrix composite filament reinforced with titanium hydride powder by a single screw extruder for use in FDM 3D printing, J. Science and Technology of Metals, 1859-4344, Vol.90, pp. 19-22, 2020
  4. Nguyen Minh Thuyet, Nguyen Hoang Viet, Le Thai Hung, Dang Quoc Khanh, Jin-Chun Kim, Properties of the interface between the as-built Ti–6Al–4V sample and the Ti substrate in selective laser sintering, International Journal of Modern Physics B, ISSN (print): 0217-9792 ISSN (online): 1793-6578, pp.2040137, 2020
  5. Le Trung Kien, Nguyen Thai Hoc, Pham Van Cuong, Le Thai Hung, Microstructure Of The Nickel-Base Aging Martensite Alloy After Spinning Process Of Thin Tube At Different Strain Reduction, Journal of Mechanical Engineering Research and Developments, ISSN: 1024-1752, Vol. 43, No. 3, pp. 397-405, 2020.
  6. Hoang Le Vu, Son Huu Nguyen, Khanh Quoc Dang, Cuong Van Pham, Hung Thai Le, The Effect of Oxidation Temperature on Activating Commercial Viscose Rayon-Based Carbon Fibers to Make the Activated Carbon Fibers (ACFs), Materials Science Forum, ISSN: 1662-9752, Vol. 985, pp 171-176, 2020.
  7. Le Thai Hung, Yu Thi Dinh, Doan Thi Phuong, Le Trung Kien, Effect of springback in dp980 advanced high strength steel on product precision in bending process, Acta Metallurgica Slovaca, Vol. 25, 2019, No. 3, p. 150-157.
  8. Nguyen Huu Son, Vu Le Hoang, Pham Van Cuong,
    La Xuan Thao, Le Thai Hung, 2019, Producing of Carbon Fibers from Commercial Viscose Fibers, Journal of Applied Mechanics and Materials, Vol. 889, pp 58-64.
  9. Le Thai Hung, Do Quang Long, Le Trung Kien, Nguyen Xuan Hung, Pham Quang, 2018 Experimental and FEM Simulation Analysis of Lateral Extrusion Process on Bimetal Cross Fitting, Journal of Advances in Materials, Volume 7, Issue 3, pp67-72.
  10. Le Thai Hung, Nguyen Hien Trang, The influence of alumina filler on mechanical, thermal and electrical properties of Bulk Moulding Compounds (BMCs) composite, Proceedings of the first international conference on materials, machines and methods for sustainable development, 18-19 May 2018, Danang, Vietnam, Vol2.8, pp745-748 ISBN: 978-604-95-0502-7
  11. Nguyen Huu Son, Vu Le Hoang, Pham Van Cuong, Le Thai Hung, Producing of Carbon Fibers from Commercial Viscose Fibers, Proceedings of the first international conference on materials, machines and methods for sustainable development, 18-19 May 2018, Danang, Vietnam, Vol2., pp737-743, ISBN: 978-604-95-0502-7
  12. Nguyen Huu Son, Pham Van Cuong, Vu Le Hoang, Le Thai Hung, “Effect of catalyst content on stabilization of commercial viscose fibers used as carbon fiber precursor”, J. Science and Technology of Metals, No. 76, (2018), pp38-43.
  13. Do Thanh Dung, Vu Ngoc Lan, Le Thai Hung, Simulation and experimental study of the continuous four-roll thick-walled plate bending process for large cylinder, J. Science and Technology of Metals, No74, p43-47, 2017. ISSN 1859-4344.
  14. Le Thai Hung, Nguyen Kim Chinh, Nguyen Duc Thai, Vu Dinh Thang, Fabrication of the Electrical Socket Covers using SMC Composite Material, Proceedings of the Metallurgical Engineering & Advanced materials technology, HUST, pp100-106, 2016, ISBN: 978-604-95-0019-0.
  15. Nguyen Huu Son, Pham Van Cuong, Vu Le Hoang, Le Thai Hung, Stabilization of commercial viscose fiber for making carbon fibers, Proceedings of the Metallurgical Engineering & Advanced materials technology, HUST, pp34-39, 2016, ISBN: 978-604-95-0019-0.
  16. Do Quang Long, Le Anh Quang, Le Thai Hung, Numerical simulation of lateral extrusion processing of thin-walled T tube from multi-layer metal material, Proceedings of the Proceedings of the National Science and Technology conference on Mechanical – Transportation engineering, HUST, pp446-450, 2016, ISBN. 978-604-95-0040-4.
  17. Le Trung Kien, Le Thai Hung, Research, design and manufacture of progressive die for manufacturing a door lock, Journal of Science and Technology technical universities, Vol112, 2016, p30-35.
  18. Le Thai Hung, Nguyen Kim Chinh, Nguyen Duc Thai, Vu Dinh Thang, Nguyen Manh Hung, Ta Hong Duong, Fabrication of the circuit breaker bottom using BMC composite material from unsaturated polyester resin and reinforced with short glass fiber, J. Science and Technology of Metals, No64, 2016, p34-38.
  19. Nguyen Huy Tung, Bui Chuong, Le Thai Hung, Nguyen Quy Dat, Rheological behavior of sheet molding compounds (SMC) with short glass fiber, Vietnam journal of chemistry, No53(5), 2015, p.631-635.
  20. Do Quang Long, Nguyen Tuan Anh, Dinh Van Hai, Le Thai Hung, Numerical simulation and metal flow experimental analysis of lateral extrusion process for cross fitting, J. Science & amp; Technology, Vol53 (2B), 2015, p21-27.
  21. Le Thai Hung, Nguyen Thai Ha, Mechanical behavior of Advanced High Strength Steel of DP980, Proceedings of the National conference on Mechanics, Duy Tan University, 6-7 August 2015, p638-644. Isbn. 978-604-913-458-6.
  22. Le Thai Hung, Vu Van Thong, Nguyen Thi Lan, Producing and Evaluation of mecahnical properties of BMC composite from unsaturated polyester resin and reinforced with short glass fiber, Proceedings of the National conference on Mechanics, Duy Tan University, 6-7/08/2015, p646-651, ISBN.978-604-913-458-6
  23. Do Quang Long, Nguyen Xuan Hoang, Le Anh Quang, Dinh Van Hai, Le Thai Hung, Influence of technological parameters on gear-like form part in lateral extrusion, Proceedings of the National conference on Mechanics, Duy Tan University, 6-7 August 2015, p869-875, ISBN.978-604-913-459-3.
  24. Pham Van Nghe, Le Anh Quang, Le Thai Hung, Determination of technological parameters in ring rolling, Proceedings of the National conference on Mechanics, HCMC University of Technology and Education, Nov 6, 2015, p601-606, ISBN.978-604-73-3691-3.

PUBLISHED BOOKS

  1. Tran Van Dung, Le Thai Hung, Technology and equipment for bending steel shapes and tubes, Hanoi Polytechnic Publishing House 2015.
  2. Nguyen Dac Trung, Le Thai Hung, Nguyen Nhu Huynh, Nguyen Trung Kien, Digital Simulation of Deformation Process, Hanoi Polytechnic Publishing House, ISBN: 9786049110177, 2011.
  3. Thai Hung Le, Denis FAVIER and Laurent ORGEAS.Composite Materials: Rheology and microstructures of thermoset polymer composites filled with mineral fillers and reinforced with short glass fibers. Editions Universitaires Europeennes. Isbn. 978-613-1-53345-7. 2010
SInh viên Học bổng Biểu mẫu
Student Scholarship Form