TS. Bùi Đức Long

• Giảng viên
• Giảng viên chính ĐH Malaya, Kuala Lumpur, Malaysia.
• Sau Tiến sĩ Học Viện Công Nghệ Hoàng Gia, Stockholm, Thuỵ Điển.
• Sau Tiến sĩ Universiti Sains Malaysia
• Tiến sĩ Universiti Sains Malaysia
• Thạc sĩ Universiti Sains Malaysia
• Tốt nghiệp ĐHBK Hà Nội, Việt Nam.
• E-mail: long.buiduc@hust.edu.vn

1. Nghiên cứu, tổng hợp vật liệu nhiệt-điện (thermoelectric materials).
2. Nghiên cứu, chế tạo vật liệu compozit nền kim loại.
3. Công nghệ và vật liệu nano.

• Vật liệu học
• Vật liệu compozit
• Vật liệu năng lượng sạch
• Vật liệu thông minh
• Vật liệu cấu trúc nano
• Tính năng vật liệu trong môi trường đặc biệt
• Luyện kim bột
• Luyện kim vật lý
• Động học các phản ứng luyện kim
• Công nghệ chế tạo hợp kim màu

1. Bang Thi Le, S Ramesh, Bui Duc Long, Nguyen Anh Son, Melvin Munar, Xingling Shi, Effect of MgO addition on the sinterability, mechanical properties and biological cell activities of sintered silicon-substituted hydroxyapatite, Journal of the Australian Ceramic Society, (2021) 1-12.
2. Bui Duc Long , Nguyen Van Khanh, Duong Ngoc Binh and Nguyen Hong Hai, Thermoelectric properties of quaternary chalcogenide Cu₂ZnSnS₄ synthesised by mechanical alloying, Powder Metallurgy 63 (2020) 220-226.
3. Bang Le Thi, Rui Shi, Bui Duc Long, S Ramesh, Shi Xingling, Yuki Sugiuraand Kunio Ishikawa, Biological responses of MC3T3-E1 on calcium carbonate coatings fabricated by hydrothermal reaction on titanium, Biomedical Materials 15 (2020) 035004.
4. Long Duc Bui, Khanh Van Nguyen, Binh Ngoc Duong, Thang Hong Le, Bang Thi Le, Suhana Binti Mohd Said, Synthesis of Cu₂ZnSnS₄ by mechanical alloying method for thermoelectric application, Acta Metallurgica Slovaca 25 (2019) 174-179.
5. Binh Ngoc Duong, Long Duc Bui, Synthesis of Cu₆Bi_4.6S₈ Compound For Thermoelectric Application, Acta Metallurgica Slovaca 25 (2019) 86-92.
6. Ovik Raihan, Suhana Mohd Said, Mohd Faizul Mohd Sabri, Shaifulazuar Rozali, Bui Duc Long, Kaoru Kimura, Kazuki Tobita, Mohd Faiz Mohd Salleh, Mohamed Bashir Ali Bashir, Parametric analysis of ball milling condition on thermoelectric performance of Bi ₆FeCo₃Sb₁₂ skutterudite, Materials Research Express 5 (2018).
7. Bui Duc Long, Duong Ngoc Binh, Le Minh Hai, Le Hong Thang, Tran Duc Huy, Thermoelectric Materials: Fundamental, Applications and Challenges, Vietnam Journal of Science and Technology 56 (1A) (2018) 1-13.
8. Suhana Mohd Said, Shahriar Mufid Rahman, Bui Duc Long, Subramanian Balamurugan, Norhayati Soin, M Asiqur Rahman, The effect of nitric acid (HNO₃) treatment on the electrical conductivity and stability of poly (3, 4-ethylenedioxythiophene): poly (styrenesulfonate)(PEDOT: PSS) thin films, Journal of Polymer Engineering 37 (2017) 163-168.
9. Fitriani, R. Ovik, D.Long, M.C. Barma, M. Riaz, R. Saidur, M.F.M. Sabri, S.M. Said, A review on nanostructures of high-temperature thermoelectric materials for waste heat recovery, Renewable and sustainable Energy Review, 64 (2016).
10. C. Barma, B.D. Long, R. Saidur, M.F.M. Sabri, S. Ramesh, S.M. Said, K. Kimura, N.H.Hai, T.D.Huy, T.B.Trung, Synthesis of Cu_3.21Bi_4.79S₉ Bismuth Chalcogenide for Thermoelectric Application, Powder Technology, 294 (2016) 348–352.
11. M. Rahman, S.B.M. Said, B. Subramanian, Bui Duc Long, Mukhtar A. Kareem, and N. Soin, Synthesis and Characterization of Polymer Electrolyte Using Deep Eutectic Solvents and Electrospun Poly(vinyl alcohol) Membrane, Ind. Eng. Chem. Res. 2016, 55, 8341−8348.
12. Mohamed Hamid Elsheikh et al.,Thermoelectric Properties of Microstructurally Modified CoSb₃Skutterudite by Hf-Addition, Journal of Electronic Materials, Vol. 45, No. 6, 2016
13. T. Bang, S. Ramesh, J. Purbolaksono, Y.C. Ching, B.D. Long, Hari Chandran, S. Ramesh, R. Othman, Effects of silicate and carbonate substitution on the properties of hydroxyapatite prepared by aqueous co-precipitation method, Materials and Design 87 (2015) 788–796).
14. T.Bang, S.Ramesh, J.Purbolaksono, B.D.Long, H. Chandran, R. Subramaniam, R. Othman, Development of a bone substitute material based on alpha-tricalcium phosphate scaffold coated with carbonate apatite/poly-epsilon-caprolactone, Biomedical Materials 10 (2015) 045011.
15. C.Barmaa, M.Riaza, R.Saidurb, B.D. Long, Estimation of thermoelectric power generation by recovering waste heat from Biomass fired thermal oil heater, Energy Conversion and Management 98 (2015) 303-313.
16. Shaikat Debnath, Suhana Mohd Said, Muhammad Faris Roslan, Mohd Faizul Mohd, Sabrib and Bui Duc Long, A DFT study on an alkali atom doped decahedral silver nanocluster for potential application in optoelectronics and catalysis, The Royal Society of Chemistry, 5 (2015) 7665-7672.
17. T. Bang, B.D. Long, R. Othman, Carbonate hydroxyapatite and silicon-substituted carbonate hydroxyapatite: synthesis, mechanical properties, and solubility evaluations, The World Scientific Journal, volume 2014.
18. D. Long, R. Othman, H. Zuhailawati, M. Umemoto, Comparison of two powder processing techniques on the properties of Cu-NbC composites, Advances in Materials Science and Engineering, Volume 2014.
19. A. Kamarudin, S. R. Sahamir, R. S. Datta, B. D. Long, M. F. M. Sabri, S. M. Said, A Review on the Fabrication of Polymer-Based Thermoelectric Materials and Fabrication Methods, The World Scientific Journal, volume 2013.
20. M. Mahbubul, T. H. Chong, S.S. Khaleduzzaman, I.M. Shahrul, R. Saidur, B.D. Long, M.A. Amalina, Effect of Ultrasonic Duration on Colloidal Structure and Viscosity of Alumina-Water Nanofluid, Industrial & Engineering Chemistry Research, ASC.
21. Othman, D.N. Binh, A.B. Ismail, B.D. Long, T. Ariga, “Effects of current density on the formation and microstructure of Sn-9Zn, Sn-8Zn-3Bi and Sn-3Ag-0.5Cu solder joints”, Intermetallics 22 (2012) 1-6.
22. D. Long, M. Umemoto, Y. Todaka, R. Othman, H. Zuhailawati, “Fabrication of high strength Cu-NbC composite conductor by high pressure torsion”, Materials and Science Engineering A 528 (2011) 1750-1756.
23. D. Long, H. Zuhailawati, M. Umemoto, Y. Todaka, R. Othman, “Effect of ethanol on the formation and properties of a Cu-NbC composite”, Journal of Alloys and Compounds 503 (2010) 228-232.
24. D. Long, R. Othman, M. Umemoto, H. Zuhailawati, “Spark plasma sintering of mechanically alloyed in situ copper-niobium carbide composite”, Journal of Alloys and Compounds, 505 (2010) 510-515.
25. Umemoto, B.D. Long, Y. Todaka, K. Tsuchiya, “Work-softening, high pressure phase formation and powder consolidation by HPT”, Materials Science Forum, Trans Tech Publications, Switzerland. vols. 654-656 (2010) pp. 1205-1210.
26. Radzali O, Long B.D, Zuhailawati H, “Effect of spark plasma sintering pressure on properties of Cu-NbC composite”, Malaysia Journal of Microscopy, 6 (1), 2010, 82-85.
27. Zuhailawati, R. Othman, B.D. Long, M. Umemoto, “Synthesis of copper–niobium carbide composite powder by in situ processing”, Journal of Alloys and Compounds 464 (2008) 185–189.